Match The Inter-Vlan Routing Method To The Corresponding Characteristic

Match The Inter-Vlan Routing Method To The Corresponding Characteristic. If i shut down one interface, nothing will change, my. Web method status protocol vlan10 192.168.10.254 yes manual up up.

Inter VLAN Routing and Static Route

How can this be accomplished using the fewest number of physical interfaces. Place the options in the following order: Web the default gateway configuration on each server and host device must be the vlan interface ip address that corresponds on the 3850.

Place The Options In The Following Order:

Ip, novell ipx, and appletalk routing are supported over ieee 802.10 vlans. Place the options in the following order: A router has two fastethernet interfaces and needs to connect to four vlans in the local network.

However, Each Is On A Different Vlan.

Switches and vlans work at the mac address layer (layer 2). You’ll see that the status says up/up, so that’s good. Web the default gateway configuration on each server and host device must be the vlan interface ip address that corresponds on the 3850.

How Can This Be Accomplished Using The Fewest Number Of Physical Interfaces.

Web method status protocol vlan10 192.168.10.254 yes manual up up. It is simple to configure a vlanif interface,. If i shut down one interface, nothing will change, my.

Place The Options In The Following Order:

Web the cisco ios supports full routing of several protocols over isl and atm lane vlans.