Change Routing Width While Routing In 17. Web tips rule category: Web by default, via size during interactive routing is determined by routing via style rule specified on a given *.pcbdoc, but if you insist, it could be changed to user.
To use a specified width while routing. Web to learn more about interactive length tuning, refer to the topic tuning route lengths. Web tips rule category:
Web To Learn More About Interactive Length Tuning, Refer To The Topic Tuning Route Lengths.
Web the preferred routing width dialog will open; When the user choice feature. Changing the track width mode while routing;
Web To Do This, Launch The Quick Differential Pair Routing Command, Click On The Existing Routing To Start, And Then Route The New Path, Coming Back To Meet The Existing.
Changing the user choice routing width while. Unary summary this rule defines the width of tracks placed on the copper (signal) layers. Web edit net (dialog) interactive routing favorite interactive routing widths (dialog) parent page:
Changing The Track Width While Interactively Routing.
For example, routing into or out of a bga will often require narrower escape routes, switching to the preferred width at the edge of the bga footprint. Web by default, via size during interactive routing is determined by routing via style rule specified on a given *.pcbdoc, but if you insist, it could be changed to user. This list reflects all predefined widths as configured in the favorite interactive routing widths dialog.
As Both Options Are Time Consuming, I Would Prefer To Change.
Web unfortunately, there doesn’t seem to be a modeless command to change the “recommended” (i.e. Power and ground connections which will need a wider trace. A common challenge with modern component technology is needing to route a net at different widths as the routing travels across the board.
Web Controlling The Routing Width And Via Size As You Route.
Use the dialog to edit the routing width. This tab sets the basic functions of regular manual routing. Web tips rule category: